USER MANUAL User guide

Index
Publication 2706-6.3
A
address
Dataliner slave mode 4-2
invalid adresses 2-3
settings C-1
alarm relay
connections 3-11
control of 4-4, 5-2, 6-3
specifications A-1
applications
DL40 master to Dl40 slave 1-4
PanelView to DL40 slave 1-4
PLC, PC, other device to DL40 slave 1-4
ASCII
character set B-1
extended characters B-2
audience P-2
B
baud rate 2-2
BASIC module
example 4-3
C
carriage return
Dataliner slave mode 4-2
PanelView slave mode 5-2
character sets B-1
clear lines 4-4
communications
data errors 7-2
displaying port settings 7-1
DL40 slave to DL40 master 3-9
DL40 slave to personal computer 3-10
setting baud rate 2-2
setting parity options 2-3
specifications A-1
connections
DL40 master to DL40 slave 1-4, 3-5
DL40 slave to 1746 BASIC module 3-6
DL40 slave to 1771 BASIC module 3-6
DL40 slave to PanelView printer port 3-6
DL40 slave to PLC-5 3-7
DL40 slave to SLC 3-7
electrical precautions 3-4
input power 3-4
PanelView to DL40 slave 1-4
PLC, PC, other device to DL40 slave 1-4
relay 3-11
RS-232 3-5
RS-485 3-8
conventions P-2
cutout
dimensions 3-2
Cyrillic characters B-3
D
data errors 7-2
Dataliner slave mode
carriage return 4-2
clearing one or more lines 4-4
display characters 4-2
display options 4-3
example messages 4-3
flash code 4-3
line number 4-2
operation 4-1
PLC-5 example D-1
protocol 4-2
relay control 4-4
reset command 4-3
slave address 4-2
SLC example D-2
description
DL40 slaves 1-1
diagnostic mode 1-2
data errors 7-2
displaying received data 7-1
serial port settings 7-1
dimensions
2-line display 3-3
4-line display 3-3