USER MANUAL User guide

Publication 2706-6.3
Enables flashing text mode. All characters received after this
command are displayed flashing until disabled with a Clear Flashing
Mode command.
Disables flashing text mode.
Displays all control codes as custom characters. These characters
represent the hexadecimal value of the control code. Any command
associated with the control code is ignored.
Exits Monitor Mode.
Displays the status of the display as defined by the DIP switches.
This is the same configuration text displayed on powerup (see page 3-
13) without product version text and pixel test. After displaying the
status information, the screen is cleared with the cursor in the leftmost
position on the first line.