Manualshelf

USER MANUAL User guide

ManualsBrandsRockwell Automation ManualsEquipment2706-LV2S_LV4S DL40 PLUS SLAVE
21222324252627282930
Publication 2706-6.3
DL40 Plus Slave to PLC-5 Channel 0
Connect the DL40 Plus Slave to a PLC-5 Channel 0 port as shown
below. You can also use programming cable (Catalog No. 2706-
NC12).
DL40 Plus Slave to SLC Channel 0
Connect the DL40 Plus Slave to an SLC Channel 0 port as shown
below. You can also use programming cable (Catalog No. 2706-
NC12).
.