USER MANUAL User guide

Publication 2706-6.3
DL40 Plus Slave to PanelView RS-232 Printer Port
Connect the DL40 Plus Slave to a PanelView RS-232 printer port as
shown below. The PanelView sends messages to the DL40 using its
print messages function. You can also use the DTAM Plus
programming cable (Catalog No. 2707-NC2) with a male-female pin
adapter.
DL40 Plus Slave to 1771-DB BASIC Module
DL40 Plus Slave to 1746-BAS BASIC Module