USER MANUAL Manual

Using the Onboard Editor to Create Messages 2–2
Publication 2706-6.1
You must enter the Onboard Editor from Run mode or Help mode.
Press
[CTRL] [E] to enter the Onboard Editor.
Use the menu tree on the next page as a guide to onboard editing.
• Press [Y][↵ ] to access a function.
• Press [N][↵ ] to go to the next function.
• Press [Space Bar] to select or toggle through options with
multiple choices.
• After toggling through all the functions in a level, entering [N][↵ ]
returns you to the first function on that level.
Pressing
[ESC] returns you to the previous menu level. You can exit
the Onboard Editor at any time by pressing
[ESC] one, two, three, or
four times depending on the current level of the editor.
A complete list of Onboard Editor commands is listed on the inside
back cover of this manual.
Exit the Onboard Editor in one of two ways:
• To exit and save your work, press [F10], then press [ESC] three
times to return to Run mode.
• To exit without saving any changes, press [ESC], answer [Y][↵ ] to
the confirmation request, then press
[ESC] three more times. You
will not be asked to confirm your decision if you have not made
any to the message.
Entering the
Onboard Editor
Exiting the Onboard Editor