USER MANUAL Manual

Overview of the DL40 Plus 1–14
Publication 2706-6.1
The following PLCs and SLCs support Remote I/O communications
with the DL40 Plus.
• PLC-5/11, 5/15
➀
, 5/20, 5/25, 5/30, 5/40, 5/60, 5/80, 5/250
• PLC-2, PLC-5/10, 5/12 with Catalog Number 1771-SN Scanner
• SLC-5/02, 5/03, 5/04 with Catalog Number 1747-SN Scanner
➁
➀
If you are using a PLC-5/15 with partial rack addressing and block transfers, you must use Series
B, Rev. J or later.
➁
Block Transfer requires a Series B or later Scanner.
PassThrough Support over a DH+ Link
The following tables list the Allen-Bradley PLCs that support
PassThrough file transfers with the DL40 Plus over a DH+ link.
PLC Types Series Revision
PLC-5/11 All All
PLC-5/15 B N or later
PLC 5/20 All All
PLC 5/25 A J or later
PLC 5/30 A B or later
PLC 5/40
A
B
E or later
PLC 5/60
A
B
B or later
PLC 5/80 All All
PLC 5/250 All All
The table below lists the computer interface boards for PassThrough
file transfers.
Catalog No. Description
1784-KT
1
/
2
-slot interface board
1784-KTX
1
/
2
-slot interface board
1784-KL
Interface board for Allen-Bradley 1784-T45
or -T47
1784-KT2 Interface module for IBM PS2
1770-KF2 Serial to DH+ interface module
1784-PCMK PCMCIA interface board
Controller Support
for Remote I/O