USER MANUAL Manual

 
Specifications
Character Height
Two line display
Four line display
11.3 mm (0.44 inch)
11.3 mm (0.44 inch)
Character Set
Table 1 English
Table 2 Cyrillic
Table 3 International
Standard & Extended ASCII Characters
Standard and Cyrillic (Russian) Characters
International ISO 8859–1 Characters
Characters Per Diaplay Line 20
Viewing Distance – Approximate 7.6 meters (25 feet)
Character Type Vacuum fluorescent, 5x7 dot matrix characters
Filtered to blue/green color
Display Luminance Adjustable 0 to 100% brightness level
Input Voltage 100 – 240 VAC , 50–60 Hz , 0.60 - 0.25A
Input Power 60 VA
Fuse Type Internal sealed (not user replaceable)
Annunciation Relay
AC Resistive Load
DC Resistive Load
One N.O. Contact
3 Amperes at 240 V AC
3 Amperes at 30 V DC
Electrical Interface
Direct Connection – Single Point
Network Connection – Multi–Drop
RS–232 (EIA–/TIA–232–E)
RS–485 (EIA–485)
Baud Rate 300, 1200, 2400, 4800, 9600,19200
Data Format 7 or 8–data bits – odd, even, or no parity
Electrical Interface Allen–Bradley Remote I/O Link
Remote I/O Baud Rate 57.6K, 115.2K, or 230.4K
Maximum I/O Cable Distance 10,000 feet (2800m) for 57.6K baud
5000 feet (1400m) for 115.2K baud
2500 feet (700m) for 230.4K baud
Rack Sizes
1
/
4
,
1
/
2
,
3
/
4
or 1 (any starting module)
Data Transfer Type Discrete I/O or Block Transfers
Electrical Interface
Parallel Input Port
Logic Low
Indeterminate
Logic High
0 to 24 VDC
High True Logic Low True Logic
0 - 0.8 VDC 3.5 - 24 VDC
0.8 - 3.5 VDC 0.8 - 3.5 VDC
3.5 - 24 VDC 0 - 0.8 VDC
Data Lines 16 Data Lines, plus 4 Strobe Lines
Input Current 5mA per data line at 12 Volts DC
Output Supply + 12 Volts DC output voltage source provided,
200mA maximum
Display Characters
Electrical
Serial
Communications Ports
PLC Remote I/O
Communications Port
(RIO versions only)
Parallel Communications Port
(Parallel Port versions only)