USER MANUAL Manual

Installation and Wiring 9–15

Publication 2706-6.1

Before connecting the power cable of the DL40 Plus, make sure the

power source is turned off.

The DL40 Plus requires 100-240 VAC, 50/60 Hz, 0.25 - 0.60 Amps.

ATTENTION: Incorrect power wire connection can

cause damage to the DL40 Plus.

Black

(Brown)

White

(Blue)

Green

(Green/Yellow)

L2N

Note: Make sure all DIP switch settings are in the correct position

before the DL40 Plus is powered up. See Chapter 10, DIP Switch

Settings, for the correct DIP switch settings.

AC Power Connector