INSTALLATION MANUAL User Manual

Chapter 4
Installing the DL50
4–4
Wall Mounting- Using Adjustable Brackets (Catalog No. 2706-NJ3)
Mount the DL50 to a wall using Adjustable Brackets (Catalog No.
2706-NJ3) as shown in Figure 4.3.
Note: Catalog No. 2706-NJ3 contains 2 pairs of brackets. You will need 2
pairs of brackets to mount Catalog No. 2706-F11J, -F11JC and 4 pairs of
brackets to mount Catalog No. 2706-F21J, -F21JC.
Figure 4.3
Wall Mounting With Adjustable Brackets
Angle Adjustment Pin
Pivot Bolt
Screw
Wall Anchor
Mounting Bracket
(Catalog No. 2706-NJ3)
Screw, Lockwasher, Nut
DL50
To adjust the viewing angle:
1) Support DL50 and remove Angle Adjustment Pin (see Figure 4.3)
2) Position DL50 at the proper angle.
3) Align bracket holes and re-insert Angle Adjustment Pin.