Instruction Manual

Publication 520COM-IN001C-EN-P - July 2014

Installation Instructions

PowerFlex 520-Series Communication Adapters

Catalog Numbers: 25-COMM-D, 25-COMM-P, 25-COMM-E2P

DeviceNet

25-COMM-D

PROFIBUS DP

25-COMM-P

EtherNet/IP Dual Port

25-COMM-E2P

Interface connector for all

communcation adapters

L1 L2 L3

DC+ DC–

Wait three minutes

after shutdown for

capacitors to discharge

to safe voltage levels.

Install the Communication Adapter Interface Connector

For PowerFlex 525For PowerFlex 523

PAGE 1
Installation Instructions PowerFlex 520-Series Communication Adapters Catalog Numbers: 25-COMM-D, 25-COMM-P, 25-COMM-E2P DeviceNet 25-COMM-D 1 L1 PROFIBUS DP 25-COMM-P L2 L3 EtherNet/IP Dual Port 25-COMM-E2P 2 I DC+ DC– Interface connector for all communcation adapters 0V 0V O 3 Install the Communication Adapter Interface Connector For PowerFlex 523 Publication 520COM-IN001C-EN-P - July 2014 For PowerFlex 525 Wait three minutes after shutdown for capacitors to discharge to safe voltage lev
PAGE 2
PowerFlex 520-Series Communication Adapters 4 Install the Communication Adapter DeviceNet adapter with optional 25-ENC-1 Incremental Encoder Input shown Communication adapter label (pre-attached) Note: Incremental Encoder Input is for PowerFlex 525 only. You can install both the communication adapter and optional Incremental Encoder Input on the same Control Module Back Cover.