User Manual

Rockwell Automation Publication 20P-UM001K-EN-P - July 2014 223
Troubleshooting Chapter 4
Table 41 - Fault Cross Reference by Number
No.
(1)
(1) Fault numbers not listed are reserved for future use.
Fault No.
(1)
Fault
2
Auxiliary Input 81…85 Port 1 DPI Loss
3
Power Failure Port 2 DPI Loss
4
AC Undervoltage Port 3 DPI Loss
5
Arm Overvoltage Port 4 DPI Loss
6
Fld Current Loss Port 5 DPI Loss
7
Motor Overload 89 Shorted SCR
8
Heatsink OvrTemp 90 Open SCR
10
Main Contactor 91 Speed Fdbk Loss
13
Overcurrent 92 Encoder Error
16
Motor Over Temp 93 Resolver Error
25
Overspeed 94 TorqPrv Spd Band
37
Inverting Fault 95 Fwd End Limit
48
Params Defaulted 96 Rev End Limit
56
STune Overspeed 97 Fwd Over Travel
57
STune Stalled 98 Rev Over Travel
58
STune LoadHi 99 Travel Lim Cflct
59
STune CurLimit 100 EEPROM Error
60
STune FrictionLo 130 Hardware Fault
61
STune Timeout 131 Interrupt Error
62
STune Aborted 132 Dsp Error
64
Drive Overload
70
Sustained Curr
71…75
Port 1 Adaptor
Port 2 Adaptor
Port 3 Adaptor
Port 4 Adaptor
Port 5 Adaptor