User Manual

216 Rockwell Automation Publication 20P-UM001K-EN-P - July 2014
Chapter 4 Troubleshooting
Drive Status
The condition or state of your drive is constantly monitored. Any changes will be
indicated through the LEDs and/or the HIM (if present).
Figure 65 - Drive Status Indicators
# Name Color State Description
1STS
(Status)
Green Flashing Drive ready, but not running and no faults are present.
Steady Drive running, no faults are present.
Yellow Flashing, Drive
Stopped
A condition exists that is preventing the drive from starting. Check
parameter 1403
[Start Inhibits] and 1380 [Drive Alarm 1].
Flashing, Drive
Running
An intermittent type 1 alarm condition is occurring. Check
parameter 1380
[Drive Alarm 1]. See Fault Descriptions on page 218
and/or Alarm Descriptions on page 224.
Steady,
Drive Running
A continuous type 1 alarm condition exists. Check parameter 1380
[Drive Alarm 1]. See Fault Descriptions on page 218
and/or Alarm
Descriptions on page 224.
Red Flashing A fault has occurred. Check [Fault x Code] or view the Fault Queue
on the HIM. See Fault Descriptions on page 218
.
Steady A non-resettable, non-configurable fault has occurred. Check [Fault
x Code] or view the Fault Queue on the HIM. See Fault Descriptions
on page 218
.
2 PORT Refer to the Communication
Adapter User Manual.
Status of DPI port internal communication (if present).
MOD Status of communication module (when installed).
NET A Status of network (if connected).
NET B Status of secondary network (if connected).
STS
PORT
MOD
NET A
NET B
2
1