Manual

8 Rockwell Automation Publication 23P-IN002A-EN-P - June 2011
Step 7: Document
the Change
1. Record the installation of the new power interface circuit board and date of
installation on the field installed option label on the side of the SAR (as shown
below).
2. Replace the SAR covers in the reverse order of removal. See Remove the
Covers on page 3.
3. Install DPI cable (if present).
Additional
Resources
These documents contain additional information concerning related Rockwell Automation
products.
You can view or download publications at
http://www.rockwellautomation.com/literature
. To order paper copies of technical
documentation, contact your local Rockwell Automation distributor or sales representative.
Resource Description
PowerFlex DC Stand-Alone Regulator and Gate Amplifier User
Manual, publication 23P-UM001
Provides installation instructions and connection and configuration information
for the PowerFlex DC Stand-Alone Regulator (SAR).
PowerFlex Digital DC Drive User Manual, publication 20D-UM001
Provides additional installation, configuration, and programming information for
the PowerFlex DC Stand-Alone Regulator (SAR).
Industrial Automation Wiring and Grounding Guidelines, publication
1770-4.1
Provides general guidelines for installing a Rockwell Automation industrial
system.
Product Certifications website, http://ab.rockwellautomation.com
Provides declarations of conformity, certificates, and other certification details.