Instruction Manual

Rockwell Automation Publication 23P-IN007A-EN-P - June 2011 9
Step 8: Document the Change
1. Record the installation of the new bimetal thermostat and date of
installation on the field installed option label on the side of the SAR (as
shown below).
2. Replace the SAR covers in the reverse order of removal. See Remove
the Covers on page 3.
3. Install DPI cable (if present).
Additional Resources
These documents contain additional information concerning related Rockwell
Automation products.
You can view or download publications at
http://www.rockwellautomation.com/literature
. To order paper copies of
technical documentation, contact your local Rockwell Automation distributor or
sales representative.
Resource Description
PowerFlex DC Stand-Alone Regulator and Gate Amplifier User
Manual, publication 23P-UM001
Provides installation instructions and connection and configuration information
for the PowerFlex DC Stand-Alone Regulator (SAR).
PowerFlex Digital DC Drive User Manual, publication 20D-UM001
Provides additional installation, configuration, and programming information for
the PowerFlex DC Stand-Alone Regulator (SAR).
Industrial Automation Wiring and Grounding Guidelines, publication
1770-4.1
Provides general guidelines for installing a Rockwell Automation industrial
system.
Product Certifications website, http://ab.rockwellautomation.com
Provides declarations of conformity, certificates, and other certification details.