Owner's manual

60 Rockwell Automation Publication 23P-UM001D-EN-P - July 2012
Chapter 4 Retrofit Guidelines
Cables appear in the following tables.
Table 15 - Round Style Connector Forward Gate Cables
Additional lengths can be found on drawing 97305100.
Table 16 - Round Style Connector Reverse Gate Cables
Additional lengths can be found on drawing 97305300.
Table 17 - Round Style Connector to Gate Coupler
To view drawing, 97305500.
Table 18 - Output of Gate Coupler Boards to SCR Gate Cable
To view drawing, 97305400.
If there is sufficient mounting space for the mounting of the Gate Coupler
Assembly, it is recommended to use the configuration shown in Figure 27 on
page 61. This will greatly simplify the mechanical aspects of the retrofit.
Catalog Number Length
SD3K-CBLFWDPM060 5 Feet
SD3K-CBLFWDPM120 10 Feet
SD3K-CBLFWDPM18015 Feet
SD3K-CBLFWDPM240 20 Feet
Catalog Number Length
SD3K-CBLREVPM060 5 Feet
SD3K-CBLREVPM120 10 Feet
SD3K-CBLREVPM18015 Feet
SD3K-CBLREVPM240 20 Feet
Catalog Number Length
SD3K-CBLCANNON060 5 Feet
SD3K-CBLCANNON072 6 Feet
SD3K-CBLCANNON096 8 Feet
SD3K-CBLCANNON120 10 Feet
Catalog Number Configuration Description
SD3K-CBLBOXA048S6These cables have box connectors on one end to interface
with the gate coupler output and "pig-tails" on the SCR gate
side for connection to a termin
al boar
d. Do not route with
power leads.
SD3K-CBLBOXB048S6R