Owner's manual

Rockwell Automation Publication 23P-UM001D-EN-P - July 2012 15
Stand Alone Regulator Installation, Wiring and Configuration Chapter 2
Approximate Dimensions and Weights
The SAR is available in a NEMA/UL Type Open, IP20 enclosure only.
Table 1 - Stand Alone Regulator Weights
Recommended Mounting Hardware: Metric M6, English 1/4 in.
ATTENTION: Remove all loose packaging materials, including any
desiccant packages from the enclosure before mounting and energizing
the SAR.
8.4 (0.33) 250.0 (9.84)
19.5
(0.77)
23.3
(0.92)
341.0
(13.43)
275.0
(10.83)
266.8
(10.51)
397.9
(15.67)
285.4 (11.24)
Dimensions are shown in mm (in.)
Stand Alone Regulator Stand Alone Regulator and Packaging
12.0 kg (26.5 lb) 14.1 kg (31 lb)
IMPORTANT
Provide a minimum of 150 mm (6.0 in.) below the unit for cable
connections.