Assembly Replacement User guide

Power Fuse Assembly Replacement (for 3000A 1395 DC Drives) 5
Publication 2361-5.20 - May 1998
Installing the Assembly 1. Place the assembly into the drive, over the four mounting bolts.
2. Fasten the four bolts (with washers) to the rear of the assembly.
3. Fasten the four nuts (with washers) to the front of the assembly.
4. Torque the nuts and bolts to 25 lb-ft.
Concluding Steps After installing the assembly, replace all Lexan shielding and secure
the fuse bay door. Dispose of old parts according to your company
proceduress and local ordinances.