Instruction Manual

soc-2
PowerFlex 400 Adjustable Frequency AC Drive FRN 1.xx - 7.xx User Manual
Publication 22C-UM001I-EN-P
Manual Updates
The information below summarizes the changes to the PowerFlex 400
User Manual since the September 2009 release.
Manual Updates
The information below summarizes the changes to the PowerFlex 400
User Manual since the October 2006 release.
New Parameters
The following parameters have been added with the release of Firmware
Release Number (FRN) 6.xx.
Description of New or Updated Information See Page(s)
Minimum Enclosure Volume column and new footnotes added. 1-13
, A-2
Drive, Fuse & Circuit Breaker Ratings topic updated. A-1
Electronic Motor Overload Protection description updated. A-3, A-4
Description of New or Updated Information See Page(s)
Note on placement of wiring for Frame E 240V, 30-37kW (40-50HP) and
480V, 55-75 kW (75-100HP) drives added.
1-17
Parameter T072 [Analog In 1 Loss]: Description revised, and Option 7
‘Hold Last’ added
3-21
Parameter T076 [Analog In 2 Loss]: Description revised, and Option 7
‘Hold Last’ added
3-23
Fault F003 (Power Loss) description changed. 4-3
Fault F004 (UnderVoltage) description changed. 4-3
Fault F017 (Input Phase Loss) description added. 4-4
Fault F032 (Fan Fdbck Loss) description added. 4-4
Altitude derating specification revised. A-3
Internal DC Bus Choke specification corrected. A-4
Parameter Number Page Parameter Number Page
[PID Invert Error] A201 3-52
[Fault 5 Time-hr] d339 3-68
[MOP Reset Sel] A202 3-52 [Fault 5 Time-min] d340 3-68
[PID Fdbk Display] d328 3-65 [Fault 6 Time-hr] d341 3-68
[DC Bus Ripple V] d329 3-65 [Fault 6 Time-min] d342 3-68
[Fault 4 Code] d330 3-66 [Fault 7 Time-hr] d343 3-69
[Fault 5 Code] d331 3-66 [Fault 7 Time-min] d344 3-69
[Fault 6 Code] d332 3-66 [Fault 8 Time-hr] d345 3-69
[Fault 7 Code] d333 3-66 [Fault 8 Time-min] d346 3-69
[Fault 8 Code] d334 3-67 [Fault 9 Time-hr] d347 3-69