Instruction Manual

3-66 Programming and Parameters
PowerFlex 400 Adjustable Frequency AC Drive FRN 1.xx - 7.xx User Manual
Publication 22C-UM001I-EN-P
Advanced Display Group (continued)
d330 [Fault 4 Code] Related Parameter(s): A197
(With FRN 6.xx and later.)
A code that represents the fourth most recent drive fault. The codes will appear in these parameters in
the order they occur (d307
[Fault 1 Code] = the most recent fault). Repetitive faults will only be
recorded once. As faults occur, this parameter will be overwritten by [Fault 3 Code]. The value of this
parameter is then moved to [Fault 3 Code].
Refer to Chapter
4 for fault code descriptions.
Values Default: Read Only
Min/Max: 0/122
Display: 1
d331 [Fault 5 Code] Related Parameter(s): A197
(With FRN 6.xx and later.)
A code that represents the fifth most recent drive fault. The codes will appear in these parameters in
the order they occur (d307
[Fault 1 Code] = the most recent fault). Repetitive faults will only be
recorded once. As faults occur, this parameter will be overwritten by [Fault 4 Code]. The value of this
parameter is then moved to [Fault 3 Code].
Refer to Chapter
4 for fault code descriptions.
Values Default: Read Only
Min/Max: 0/122
Display: 1
d332 [Fault 6 Code] Related Parameter(s): A197
(With FRN 6.xx and later.)
A code that represents the sixth most recent drive fault. The codes will appear in these parameters in
the order they occur (d307
[Fault 1 Code] = the most recent fault). Repetitive faults will only be
recorded once. As faults occur, this parameter will be overwritten by [Fault 5 Code].
Refer to Chapter
4 for fault code descriptions.
Values Default: Read Only
Min/Max: 0/122
Display: 1
d333 [Fault 7 Code] Related Parameter(s): A197
(With FRN 6.xx and later.)
A code that represents the seventh most recent drive fault. The codes will appear in these parameters
in the order they occur (d307
[Fault 1 Code] = the most recent fault). Repetitive faults will only be
recorded once. As faults occur, this parameter will be overwritten by [Fault 6 Code].
Refer to Chapter
4 for fault code descriptions.
Values Default: Read Only
Min/Max: 0/122
Display: 1