User manual

Configuring the WIM 3-19
The “PowerFlex 40” connection window (Figure 3.33) re-appears,
but this time with the “COM1 on PowerFlex…” icon lit up in green,
indicating that a wireless communication connection now exists.
Figure 3.33 PowerFlex 40 Connection Window with Lit Green Icon
5. Launch RSLinx to create a driver to represent the connection on
COM8 (communication port assigned in Step 4 on Page 3-18
.
6. Select Communication > Configure Drivers… to display the
Configure Drivers screen. From the Available Driver Types
pull-down list, select “RS-232 DF1 devices” as shown in
(Figure 3.34
).
Figure 3.34 Configure Drivers Screen