User manual

AC Adjustable Frequency Drives
PowerFlex 700
93
Packaged Drives Programs
k
I/O
Code Control I/O Volts
A Std. 24V dc/ac
B Std. 115V ac
C Vector 24V dc
D Vector 115V ac
l
Feedback
Code Type
0 None
1 12V Encoder
m
Reserved
n
Special Options
Code Type
QS Quick Ship
o
Options
Code Description
-ND § Normal Duty
-HD § Heavy Duty
-B0 § Bypass Not Required
-B1 § Manual Bypass
-B2 Auto Bypass
-C1 § Drive Only Control Power
-C5 § 115V User Supplied Control Power
-E9 Enclosure Nameplate
-G1
Johnson Controls Metasys
Interface
-J1 Aux. Contacts, Control Power On
-J2 Aux. Contacts, Drive Fault
-J3 Aux. Contacts, Alarm
-J4 Aux. Contacts, Run
-J5 Aux. Contacts, At Speed
-J6 Programmable Relay A
-J7 Programmable Relay B
-J8 Motor Heater Control
-L1 3% Input Line Reactor
-L2 3% Output Line Reactor
-M3 Motor Run Meter, Drive/Bypass
-N1 Isolated Analog Input, 0-10V DC
-N2 Isolated Analog Input, 4-20 mA
-N3 Isolated Analog Output, 0-10V DC
-N5 Building Mng. Control Interface
-P1 § No Input Protection
-P2 § Input Fuses, Drive
-P3 § Circuit Breaker, Drive
-P4 § Circuit Breaker, Drive/Bypass Mode
-P6 § Drive Disconnect Switch
-P7 § Drive/Bypass Mode Fused Disc.
-P11 Drive Input Contactor
-P12 Drive Output Contactor
-S1 H/O/A S.S. (Start/Stop/Spd. Ref.)
-S9 Run Pilot Light
-S10 Drive Fault Pilot Light
-S11 At Speed Pilot Light
-S12 Drive Alarm Pilot Light
-S13 Control Power On Pilot Light
-S14 Drive & Bypass Mode Pilot Lights
-S15
Bypass Mode & Auto Bypass En.
P.L.
-S16 Drive Disable Mushroom P.B.
-S17 Motor Fault Pilot Light
§ Must select either -ND or HD, Bypass option -
B0 or B1, Power Disconnecting Means option -
P1, P2, P3, P4, P6 or P7, and Control Power
option -C1 or C5.
i
Emission
Code Rating
A
Filter w/CM Choke
(Std. 480V)
B ♣
Filter wo/CM Choke
(Std. 240V)
♣ Engineered Drives Program Only.
j
Comm Slot
Code Version
C ControlNet (Coax)
D DeviceNet
E EtherNet/IP
I Interbus
P PROFIBUS
R RIO
S RS-485
N None
HHVAC
L ♣
LonWorks
♣ Engineered Drives Program Only.