User manual

AC Adjustable Frequency Drives
PowerFlex 700
90
Factory Installed Options
Documentation
Description
Cat. Code
(Position f)
User Manual
A
No User Manual
N
Internal Brake IGBT ✶
Drive Input
Voltage Brake IGBT Frame
Cat. Code
(Position g)
208…480V ac Standard 0…3 Y
208…480V ac Optional 4 Y
208…690V ac Optional 5
Y
208…690V ac Optional 6 Y
✶ The Internal Brake IGBT option can not be field installed.
Internal Dynamic Brake Resistors
These resistors have a limited duty cycle. Refer to the PowerFlex
Dynamic Braking Selection Guide to determine if an internal
resistor will be sufficient for your application. An external resistor
may be required.
Feedback Options (Vector Control Only)
Description
Cat. Code
(Position l)
No Encoder
0
12V Encoder
➤
1
➤ Encoder option can also be used as a pulse input.
Special Firmware
Description
Cat. Code
(Position m…n)
60 Hz Maximum
NNADa
a Must be used with Vector Control option C or D (position k) in the catalog
string.
Drive Input
Voltage Frame
Brake Resistance Cat. Code
Ω
(Position h)
208…240V ac
062
Y
1 (2…5 Hp) 62
Y
1 (7.5 Hp) 22 Y
222
Y
380…480V ac
0 115 Y
1 115
Y
268 Y
Control and I/O Options
Control
Cat. Code
(Position k)
Standard Control (Open Loop) - No I/O
N
Standard Control (Open Loop) - 24V dc/ac
A
Standard Control (Open Loop) - 115V ac B
Vector Control - 24V dc‡♣
C
Vector Control - 115V ac‡♣
D
‡ Vector Control option utilizes DPI Only.
♣ Only Series B Cassettes will ship from the factory after February 1, 2005.
Internal EMC Filter and Common Mode Choke
Drive Input
Voltage Frame CE Filter
Common
Mode Choke
Cat. Code
(Position i)
208…240V ac 3 with Filter with Choke
A
208…240V ac 0…3 with Filter No Choke
B
208…240V ac 4…6 with Filter with Choke A
380…480V ac 0…6 with Filter with Choke
A
600…690V ac 0…6
with Filter7
with Choke
A
7 Note: CE Certification testing has not been performed on 600V class
drives below 77 Amps.
Internal Communication Adapters
Description
Cat. Code
(Position j)
ControlNet C
DeviceNet D
EtherNet/IP
E
HVAC H
Remote I/O
R
RS-485 DF1 S
Human Interface and Wireless Interface Modules
IP20/NEMA Type 1 (Position e)
Catalog Code: 0
No HIM (Blank Cover)
Catalog Code: 2
LCD Digital Speed
Catalog Code: 3
LCD Full Numeric
Catalog Code: 5
LCD Programmer Only
Catalog Code: 8
DPI WIM
Catalog Code: J
Door Mounted LCD
Full Numeric
(IP66/NEMA Type 12)
Catalog Code: K
Door Mounted LCD
Programmer Only
(IP66/NEMA Type 12)