User manual

AC Adjustable Frequency Drives
PowerFlex 70
69
Packaged Drives Programs
Communication Options
Description
Option
Code
Area
Factor
Communication Options (Drive Mounted)
Communication Module, ControlNet -GC A0
Communication Module, DeviceNet
-GD A0
Communication Module, Interbus -GI A0
Communication Module, PROFIBUS
-GP A0
Communication Module, Remote I0 -GR A0
Johnson Controls Metasys Interface (Panel Mount)
-GDN27
A20
7 Requires user-supplied control power or the -CF option.
Motor Interface Options
Description
Option
Code
Area
Factor
➤
Motor Heater Control, 120V AC, 180 W,
Remote Power
-MHa
A10
➤ Applies to NEMA Type 1 enclosures only.
a Requires user-supplied control power.
Door Mounted Options
Description
Option
Code
Area
Factor
➤
Drive/Bypass - Motor Run Time Meter (Elapsed
Hours) Non-Resettable
-ME✶
A1
Nameplate, Door Mounted 158.8 x 50.8 mm (6.25 x
2 in.) white Lamacoid with black letters
-ET
A0
✶ Requires user-supplied control power or the -CF option.
➤ Applies to NEMA Type 1 enclosures only.
 Actual message to be defined by user at order entry, otherwise will be
supplied blank.
Operator Devices
The operator devices listed below are logically grouped into sets.
Only one option code selection may be made from Set D4. Where
possible, 800EP style devices will be supplied mounted and wired.
Loose or individual devices are not available.
Option
Set
Description
M.H.P.B. = Mushroom Head Push
Button
Option
Code
Area
Factor
➤
D1 Hand/Off/Auto (Start/Stop/Speed Ref.) -D1A A1
D2 Drive Pilot Lights – See “Drive Digital Output Options”
D3 Control Power On Pilot Light
-D3A✶
A1
D4
Drive Mode & Bypass Mode Pilot Lights
-D4A✶
A1
Auto Bypass Enable On & Bypass Mode
Pilot Lights7‡
-D4B✶
A1
D5 Drive Disable (Push-Pull) M.H.P.B.
-D5A A1
D6
Motor Fault Pilot Light7
-D6A✶
A1
➤ Applies to NEMA Type 1 enclosures only.
✶ Requires user-supplied control power or the -CF option.
7 Must be used with options -BM1 or BM2.
‡ Must be used with options -BA, BM1 or BM2.
Codes and Standards
Code/Standard Action
CE
(European Conformance
Standard)
Not available on this
product.
IEEE519
(Harmonic Distortion Levels)
Not available on this
product.
UL, c-UL (CSA)
This program provides UL
panel recognition from the
factory as standard.
Enclosures (Must Choose One)
Description & Approximate Dimensions in mm (in)
Option
Code
Area
Factor
➤
IP 20/NEMA Type 1§
667.8 x 220.7 x 293.1 (26.3 x 8.7. x 11.5), Style 1 -AA1 A0
667.8 x 441.5 x 293.1 (26.3 x 17.4. x 11.5), Style 2
-AA2 A130
667.8 x 662.2 x 293.1 (26.3 x 26.1. x 11.5), Style 3 -AA3 A360
IP 65/NEMA Type 4/12 Indoor (AF) &
IP 65/NEMA Type 3/4 Outdoor (AH)♣
457.2 x 304.8 x 304.8 (18 x 12 x 12), Style 1 -AF
N/A
457.2 x 406.4 x 304.8 (18 x 16 x 12), Style 2
-AF
558.8 x 406.4 x 304.8 (22 x 16 x 12), Style 3
-AF
812.8 x 330.2 x 304.8 (32 x 13 x 12), Style 4 -AF/AH
812.8 x 609.6 x 406.4 (32 x 24 x 16), Style 5
-AF/AH
965.2 x 609.6 x 406.4 (38 x 24 x 16), Style 6 -AF/AH
1270.0 x 609.6 x 406.4 (50 x 24 x 16), Style 7
-AF/AH
1117.6 x 914.4 x 406.4 (44 x 36 x 16), Style 8 -AH
1270.0 x 914.4 x 406.4 (50 x 36 x 16), Style 9
-AH
1574.8 x 914.4 x 406.4 (62 x 36 x 16), Style 10
-AH
➤ Applies to NEMA Type 1 enclosures only.
§ NEMA Type 1 enclosure size will be dependent on the total option Area
Factors. Add up all the option Area Factors to determine enclosure size.
When exact dimensions are required, consult factory.
♣ See "Enclosure Selection" for proper NEMA Type 3/4 outdoor or 4/12
indoor enclosure selection.