User manual

AC Adjustable Frequency Drives
Important Safety and Product Information
155
Contents
Important User Information
This guide has been developed as a quick reference tool to Allen-
Bradley industrial automation controls and factory assemblies. It is
not intended to replace factory user manuals or technical
documentation supplied with Allen-Bradley equipment.
Because of the variety of uses for the products described in this
publication, those responsible for the application and use of these
products must satisfy themselves that all necessary steps have
been taken to assure that each application and use meets all
performance and safety requirements, including any applicable
laws, regulations, codes, and standards. Factory provided user
manuals and technical documentation should not be solely relied
on for those purposes.
Rockwell Automation reserves the right to change the features or
characteristics of its products at any time. Therefore, the
information contained in this publication is subject to change at
any time without notice.
The illustrations, charts, diagrams, and layout examples shown in
this guide are intended solely as examples. Since there are many
variables and requirements associated with any particular
installation, Rockwell Automation can not assume responsibility
or liability (including intellectual property infringement liability)
for actual use based upon the examples shown in this publication.
Allen-Bradley Publication SGI-1.1 "General Information Safety
Guidelines for Solid-State Control" (available from you local
Rockwell Automation office) describes some important differences
between solid-state equipment and electromechanical devices,
which should be taken into consideration when applying products
such as those described in this publication.
Metric Conversion Chart
Metric Conversion Factors
From To Multiply by
Length
Inches (in) Millimeters (mm) 25.4
Inches (in) Centimeters (cm) 2.54
Feet (ft) Meters (m) 0.305
Yards (yd) Meters (m) 0.914
Millimeters (mm) Inches (in) 0.0394
Centimeters (cm) Inches (in) 0.394
Meters (m) Feet (ft) 3.28
Meters (m) Yards (yd) 1.09
Area
Square inches (in
2
) Square millimeters (mm
2
) 645
Square inches (in
2
) Square centimeters (cm
2
)6.45
Square feet (ft
2
) Square meters (m
2
) 0.0929
Square yards (yd
2
) Square meters (m
2
) 0.836
Square millimeters (mm
2
) Square inches (in
2
) 0.00155
Square centimeters (cm
2
) Square inches (in
2
) 0.155
Square meters (m
2
) Square feet (ft
2
) 10.8
Square meters (m
2
) Square yards (yd
2
)1.20
Weight
Ounces (oz) Grams (g) 28.3
Pounds (lb) Kilograms (kg) 0.454
Grams (g) Ounces (oz) 0.0353
Kilograms (kg) Pounds (lb) 2.20
Volume
Cubic inches (in
3
) Cubic centimeters (cm
3
) 16.4
Cubic feet (ft
3
) Cubic meters (m
3
) 0.0283
Cubic inches (in
3
) Liters (L) 0.0164
Cubic feet (ft
3
) Liters (L) 28.3
Gallons (Imp) Liters (L) 4.55
Gallons (US) Liters (L) 3.79
Cubic centimeters (cm
3
) Cubic inches (in
3
) 0.061
Cubic meters (m
3
) Cubic feet (ft
3
) 35.3
Liters (L) Cubic inches (in
3
) 61.0
Liters (L) Cubic feet (ft
3
) 0.0353
Liters (L) Gallons (Imp) 0.220
Liters (L) Gallons (US) 0.264
Pressure
Pounds/square inch (psi) Kilopascals (kPa) 6.89
Pounds/square inch (psi) Bars (Bar) 0.0689
Kilopascals (kPa) Pounds/square inch (psi) 0.145
Bars (Bar) Pounds/square inch (psi) 14.5
Torque
Pound inch (lb in) Newton meters (N•m) 0.113
Newton meters (N•m) Pound inch (lb in) 8.85
Temperature
Degrees Fahrenheit (°F) Degrees Celsius (°C)
✶
Degrees Celsius (°C) Degrees Fahrenheit (°F)
7
✶ Conversion Formula: 5/9 (°F – 32 °F) = °C.
7 Conversion Formula: 9/5 (°C) + 32 °F = °F.
Description
Important User Information this page
General Terms and Conditions of Sale page 156
Preventive Maintenance and Repair page 160
Product Compliance page 161
Specifying Enclosures page 163