User manual

AC Adjustable Frequency Drives
PowerFlex 700S
143
Drive Application Software
Drive Application Software brings together an outstanding range
of application experience and performance drive products to
provide the user with pre-engineered and cost effective drive
application solutions.
The following Application Modules are available for installation
and use exclusively in the PowerFlex 700S AC drives with
DriveLogix™ that are provided to customers. The Drive
Application Software is licensed and cannot be transferred or
resold. On site commissioning and support services are not
included with Drive Application Software.
Product Selection
Media
Application Modules — User Manuals are distributed on CD-
ROM. The License Agreement with Serial Number is also
provided for downloading the software from the Internet at
http://www.ab.com/drives/drvappsw.
Function Modules — User Manuals are located on the internet at
http://www.ab.com/drives/drvappsw. A serial number is not needed
for download.
Rockwell Automation is committed to maintaining and supporting
Allen-Bradley drives and installations. Included in this
commitment is start-up support and consultation for drive
applications.
y Application Module  Center Winder/Unwind is used for center
driven variable diameter process line applications requiring
Loadcell, Dancer, or Open Loop web tension control.
y Application Module  Inline Tensioning is used for constant
diameter process line applications requiring Loadcell, Dancer, or
Draw web tension control.
y Application Module  Lead Line Control is used for lead
section control and line coordination with support for
progressive and regressive draw. This Application Module works
with the Center Winder/Unwind and Inline Tensioning
Application Modules.
y Application Module  Positioning (Point to Point) is used for
point to point position control with support for selectable target
positions, Learn Target function and Homing functions.
y Function Module  Spindle orient is used to position a motor to
a precise location regardless of whether the motor is starting
from standstill or rotating at high speed. The location is defined
by a marker pulse.
y Function Module  TorqueProv is used to automate torque and
brake proving for lifting applications.
y Process Line Suite of Application Modules includes the Lead
Line Control, Inline Tensioning, and Center Winder/Unwind
application modules.
Application Module ✶ Cat. No.
Phone
Support
7
Center Winder/Unwind ‡♣
9329-KAA12A 5 hours
Inline Tensioning ‡♣
9329-KAA12B 3 hours
Lead Line Control
9329-KAA12C 2 hours
Positioning (Point to Point)
9329-KAA11D 3 hours
Process Line Suite ‡♣
9329-KAA12E 10 hours
Function Modules
Spindle Orient None
Torque Prove
None
✶ DriveLogix is required for use with the Drive Application Software —
Application Modules.
7 Phone support is application related technical phone support and is in
addition to standard drives support included with hardware purchases.
‡ Restricted Access, Contact Drive Application Software Product Manager
or Drives Negotiation Team to place order.
♣ These programs are available to OEMs and System Integrators with in-
house services capable of on-site commissioning, complete support and
service of the applications.