User manual

Wireless Flash Updating DPI Devices C-13
Figure C.23 ControlFLASH Setup Complete Screen
3. Establish wireless communication between the WIM and the desktop
or laptop computer. For this procedure, refer to Using
DriveExecutiven page 3-16.
4. With the DriveExecutive linear list screen (Figure C.24) displayed,
right-click on the device to be flash updated (for this example, a
PowerFlex 70 drive).
Figure C.24 DriveExecutive Linear List Screen
5. Select Properties… to display the device’s general information
screen. Then click the Component Details tab to show its related
screen (Figure C.25
).