User manual

C-4 Wireless Flash Updating DPI Devices
5. Establish wireless communication between the WIM and Pocket PC.
For this procedure, refer to Using Pocket DriveExplorer for Pocket
PCn page 3-2.
6. With the StatusMonitor screen (Figure C.5) for the drive displayed,
select Tasks > Flash Update to open the DeviceFlash screen
(Figure C.6
).
7. In the Available Updates list, select the appropriate firmware version
(for this example, 2.007.123). Then tap Next to continue. The flash
update warning screen (Figure C.7) appears.
Figure C.7 DeviceFlash Update Warning Screen
Figure C.5 Drive StatusMonitor Screen Figure C.6 DeviceFlash Screen