User manual

Configuring the WIM 3-19
The “PowerFlex 70” connection window (Figure 3.32) re-appears,
but this time with the “COM1 on PowerFlex…” icon lit up in green,
indicating that a wireless communication connection now exists.
Figure 3.32 PowerFlex 70 Connection Window with Lit Green Icon
5. Launch RSLinx to create a driver to represent the connection on
COM8 (communication port assigned in Step 4 on Page 3-18
).
6. Select Communications > Configure Drivers… to display the
Configure Drivers screen. From the Available Driver Types
pull-down list, select “RS-232 DF1 devices” as shown in
Figure 3.33
.
Figure 3.33 Configure Drivers Screen