User manual

3-4 Configuring the WIM
20-COMM-E adapter). If you select “Remote,” disregard Step 5
and instead go directly to Step 10 on Page 3-6
and perform
sub-steps A through D. Step 10 must be performed before
proceeding with Step 6 below.
Figure 3.4 Local Connection Screen
5. Enter a desired connection name and tap Next ->. The “Connection
Summary” screen (Figure 3.5) appears.
Figure 3.5 Connection Summary Screen
6. You can save the connection information and connect immediately,
or save the connection for connecting later.
After making a selection, the “Location for saved connection” screen
(Figure 3.6
) appears, enabling you to navigate to a desired location
on the Pocket PC to store connections.