User Manual

Chapter 3
Configuring the Adapter
Chapter 3 provides instructions and information for setting the
parameters in the adapter.
For a list of parameters, refer to Appendix
B, Adapter Parameters. For
definitions of terms in this chapter, refer to the Glossary.
The LonWorks adapter stores parameters and other information in its
own non-volatile memory. You must, therefore, access the adapter to
view and edit its parameters. The following tools can be used to access
the adapter parameters:
Topic Page
Configuration Tools
3-1
Using the PowerFlex 4-Class HIM 3-2
Setting the Comm Fault Action 3-3
Setting the Idle Fault Action 3-4
Resetting the Adapter 3-5
Viewing the Adapter Configuration 3-6
Configuration Tools
Tool Refer To:
PowerFlex 4-Class HIM
(22-HIM-*)
Page 3-2
DriveExplorer Software
(version 3.01 or higher)
http://www.ab.com/drives/driveexplorer, and
DriveExplorer online help (installed with the software)
DriveExecutive Software
(version 3.01 or higher)
http://www.ab.com/drives/drivetools, and
DriveExecutive online help (installed with the software)