User Manual

1-6 Getting Started
The adapter uses three status indicators to report its operating status. They
can be viewed on the adapter or through the drive cover (Figure 1.2).
Figure 1.2 Status Indicators (location on drive may vary)
If any other conditions occur, refer to Chapter 5, Troubleshooting.
Modes of Operation
Item Status
Indicator
Normal
Status
(1)
(1)
If all status indicators are off, the adapter is not receiving power. Refer to Chapter 2,
Installing the Adapter
, for instructions on installing the adapter.
Description
➊
PORT Flashing
Green
Normal Operation. The adapter is establishing an I/O
connection to the drive. It will turn solid green or red.
Green Normal Operation. The adapter is properly connected and
communicating with the drive
➋
MOD Flashing
Green
Normal Operation. The adapter is operating but is not
transferring I/O data.
Green Normal Operation. The adapter is operating and
transmitting I/O data.
➌
NET A Off Normal Operation. The adapter is configured.
➌
➊
➋
➌
➊
➋
Bottom side
of adapter board