User Manual

Getting Started 1-3
The adapter is compatible with Allen-Bradley PowerFlex 4-Class
(Component-Class) drives and other products that support an internal
DSI adapter. At the time of publication, compatible products include:
• PowerFlex 4 drives with DSI External Comms Kit
• PowerFlex 40 drives
• PowerFlex 400 drives
Equipment Shipped with the Adapter
When you unpack the adapter, verify that the package includes:
User-Supplied Equipment
To install and configure the adapter, you must supply:
Compatible Products
Required Equipment
❑ One LonWorks adapter
❑ One 15.24 cm (6 in.) Internal Interface Cable
❑ This manual
❑ A diskette containing resource files
❑ A small flathead screwdriver
❑ Network-specific cable to connect the adapter to the network. Refer
to the network-specific documentation for the cable
recommendations and requirements.
❑ A configuration tool, such as:
– PowerFlex 4-Class HIM (22-HIM-*)
– DriveExplorer (version 3.01 or higher)
– DriveExecutive stand-alone software (version 3.01 or higher) or
bundled with the DriveTools SP suite (version 1.01 or higher)
– LonMaker configuration software
❑ A PC connection to the LonWorks network