Manual

8-10 Troubleshooting
43 EN Open An I/O connection from the network to the adapter was opened.
44 EN Close An I/O connection from the network to the adapter was closed.
45 EN Timeout An I/O connection from the network to the adapter has timed
out.
46 EN Comm Flt The adapter has performed the “Comm Flt” action specified
by the user.
47 EN Idle Flt The adapter has performed the “Idle Flt” action specified by
the user.
48 PCCC IO Open The adapter has begun receiving PCCC Control messages
(the PCCC Control Timeout was previously set to a
non-zero value).
49 PCCC IO Close The device sending PCCC Control messages to the adapter
has set the PCCC Control Timeout to a value of zero.
50 PCCC IO Time Flt The adapter has not received a PCCC Control message for
longer than the PCCC Control Timeout.
51 EN Sent Reset The adapter received a reset from the network.
52 Msg Ctrl Open The adapter has begun receiving Client-Server Control
messages (the Client-Server Control Timeout was
previously set to a non-zero value).
53 Msg Ctrl Close The device sending Client-Server Control messages to the
adapter has set the Client-Server Control Timeout to a value
of zero.
54 Msg Ctrl Timeout The adapter has not received a Client-Server Control
message for longer than the established timeout period.
55 – 59 Reserved
Adapter-Specific Events
60 BOOTP Response The adapter received a response to its BOOTP request.
61 E-mail Failed The adapter attempted to send an e-mail notice, but could
not deliver the message to the mail server.
Code Event Description