Instruction Manual

Rockwell Automation Publication 750-IN014A-EN-P - August 2010
2
Prepare the Roll-out Cart
The 20-750-CART1-F8 Roll-out Cart is required to remove the Frame 8 drive
from the cabinet. It can be adjusted for reach and height.
Figure 1 - Roll-out Cart Features
No. Description
➊ Adjustment for Curb Offset/Reach: 0…114 mm (0…4.5 in.)
➋ Adjustable Curb Height: 0…182 mm (0…7.2 in.)
No. Description
➊ Threaded studs and nuts allow precision height and leveling adjustments (four positions)
➋ Bubble levels help with fine adjustment of the cart deck (three positions)
➌ Handle
➍ Retaining clips positively engage the cart with the drive cabinet (two positions)
➎ Alignment track keeps the drive in the correct position
➏ Cart deck
➐ Cart chassis
➑ Drive stop and capture screws
➒ Hardware for assembling I-beam spacers (not shown)
➋
➊
➏
➎
➑
➋
➍
➌
➊
➐
➍