Reference Manual Owner's manual

40 Rockwell Automation Publication 750-RM001F-EN-P - February 2012
Chapter 4 Speed Monitoring I/O Signals
Reset Input (Reset_In)
The Reset input is for reset and monitoring of the safety circuit. The reset input
can be configured for automatic, manual, or manual monitored reset types.
Wire the reset input terminal (TB2-S34) to the 24V DC input terminal, (TB2-
A1), depending on the configured reset type, as shown.
IMPORTANT
If you configure the safety option for automatic reset, wiring of the reset input
terminal (TB2-S34)is not required.
Manual
Manual
Monitored
Reset
Reset
RESET_IN
RESET_IN
TB2-A1
TB2-S34
TB2-A1
TB2-S34