Manual

112 Rockwell Automation Publication 750-IN001N-EN-P - April 2014
PowerFlex 750-Series AC Drives
Release Power Option Assembly From Cabinet
To access the interior of the power option cabinet to complete installation and
power wiring connections, remove the power option assembly from the cabinet.
1. Open the cabinet door.
2. Disconnect the six captive bolts connecting the power option assembly to
the cabinet frame (No. ➊ Figure 72
).
3. Disconnect the wiring harnesses and bus connections shown in Figure 73
.
IMPORTANT
Before removing the power option assembly, be sure the cabinet is in its intended
installed position. Height adjustments to the roll-out cart can not be made while
carrying the assembly.