Manual

7 CENTERLINE
®
2100 Motor Control Centers Joining and Splicing Vertical Sections
Figure 5 NEMA 3R/4
Front View
Cabinet
Extension
3. Remove drip hood angle from shipping block being spliced. See Figure
5.
4. Install gasket (supplied with splice kit) on back plate and top plate (If
not present on cabinet.). See Figure 5.
Wireway Extension
Drip Hood Angle
Spacer
Gasket
Left Hand
Shipping Block
Right Hand
Shipping Block
Side Sheet
Side Sheet
Gasket to be
installed in the
field
Cabinet Spacer
Wireway
Top View
Publication 2100-IN010D-EN-P—February 2007