Owner manual

Rockwell Automation Publication 20Y-UM001E-EN-P - July 2014 91
Chapter 4
Programming and Parameters
This chapter provides a complete listing and description of the PowerFlex Active
Front End parameters. The parameters can be programmed (viewed or edited)
using an LCD HIM (Human Interface Module). Alternatively, programming can
be performed using a personal computer with a configuration tool such as
Connected Components Workbench™ software, DriveExecutive™ software, or
DriveExplorer™ software.
About Parameters
To configure the AFE to operate in a specific way, certain AFE parameters may
have to be configured appropriately. Three types of parameters exist:
•Numeric Parameters
These parameters have a single numeric value (such as 1V AC).
•ENUM Parameters
These parameters allow a selection from 2 or more items. The LCD HIM
displays a text message for each item.
•Bit Parameters
These parameters have individual bits associated with features or
conditions. If the bit is 0, the feature is off or the condition is false. If the
bit is 1, the feature is on or the condition is true.
The following example table shows how each parameter type is presented in this
manual.
Topic Page
About Parameters
91
How AFE Parameters are Organized
92
Monitor File
95
Dynamic Control File
97
Utility File
101
Communication File
107
Inputs & Outputs File
109
Parameter Cross Reference – by Name
113
Parameter Cross Reference – by Number
114