Owner manual

84 Rockwell Automation Publication PFLEX-IN029B-EN-P - August 2014
Chapter 2 PowerFlex 700H and 700S Drives - Frame 10 Procedures
5. Disconnect the cable from connector X1 on the ASIC board and remove
the fan assembly from the drive.
6. For newer drives only, remove the M4 x 15 mm hexalobular screw that
secures the fan to the bracket.
7. Install the ASIC cooling fan and assembly in the reverse order of removal.
5
6
T20
3.0 N
•m (27 lb•in)