Owner manual

Rockwell Automation Publication PFLEX-IN029B-EN-P - August 2014 71
PowerFlex 700H and 700S Drives - Frame 10 Procedures Chapter 2
Follow these steps to remove the main AC fan system and replace it with a main
DC fan system.
1. Review the General Precautions on page 17
.
2. Remove power from the drive. See Remove Power from the Drive on page
59
.
3. Move the control frame and remove the air flow plate and protective
covers from the drive. See Move the Control Frame and Remove the Air
Flow Plate and Protective Covers on page 60
.
4. Remove the main AC fan power supply assemblies. See Remove the Main
AC or DC Fan Power Supply Assemblies on page 63
.