Owner manual

Rockwell Automation Publication PFLEX-IN029B-EN-P - August 2014 25
PowerFlex 700H and 700S Drives - Frame 9 Procedures Chapter 1
Removing the Main Fan Inverter Capacitor Bracket
In order to test and/or replace other fan system components in the drive, you
must first remove the main fan inverter cooling fan capacitor bracket from the
drive.
The main fan inverter compartment is located in the bottom, left-hand corner of
the drive, under the connection plate.
Follow these steps to remove the main fan inverter capacitor bracket.
1. Review the General Precautions on page 17
.
2. Remove power from the drive. See Remove Power from the Drive on page
23
.
3. Remove the lower protective cover from the drive. See Remove the Lower
Protective Cover on page 24
.