Owner manual

24 Rockwell Automation Publication PFLEX-IN029B-EN-P - August 2014
Chapter 1 PowerFlex 700H and 700S Drives - Frame 9 Procedures
Remove the Lower Protective Cover
1. Review the General Precautions on page 17.
2. Remove power from the drive. See Remove Power from the Drive on page
23
.
3. Remove the eight M4 x 8 mm POZIDRIV screws that secure the lower
protective cover to the drive and remove the cover.
Remove the Upper Protective Cover
1. Review the General Precautions on page 17.
2. Remove power from the drive. See Remove Power from the Drive on page
23
.
3. Remove the eight M4 x 8 mm POZIDRIV screws that secure the upper
protective cover to the drive and remove the cover.
(8 Screws)
L1 L2 L3 L1 L2 L3 U/T1 V/T2 W/T3 U/T1 V/T2 W/T3
PZ2
3.0 N
•m (27 lb•in)
L1 L2 L3 L1 L2 L3 U/T1 V/T2 W/T3 U/T1 V/T2 W/T3
(8 Screws)
PZ2
3.0 N
•m (27 lb•in)