Owner manual

Rockwell Automation Publication PFLEX-IN029B-EN-P - August 2014 229
PowerFlex 700AFE Drive - Frame 10 Procedures Chapter 7
LCL Filter Fan Assembly Removal and Installation
Note: The fan replacement kit only contains the fan motor and impeller
assembly. Therefore, the sheet metal housing for the fan must be reused.
1. Review the General Precautions on page 17
.
2. Remove power from the AFE. See Remove Power from the AFE on page
192
.
3. Disconnect terminal blocks X51 and X53.
X51
X53
Note: Image for SK-Y1-DCPS1-D460
or SK-Y1-DCPS1-F325