Owner manual

162 Rockwell Automation Publication PFLEX-IN029B-EN-P - August 2014
Chapter 5 PowerFlex 700H and 700S Drives - Frame 13 Procedures
Converter Units
1. Review the General Precautions on page 17.
2. Remove power from the drive. See Remove Power from the Drive on page
134
.
3. Move the control frame, and remove the screens, airflow plates, and
protective covers. See Move the Control Frame, and Remove the Screens,
Airflow Plates, and Protective Covers on page 135
.
4. Remove the main fan assemblies. See Remove the Main Fan Assembly on
page 143
.
5. Disconnect the converter X1 wire harness (#1) from the connector and
fan extension wire (#2) on the sheetmetal cover.
5
Series B converter shown