Owner manual

150 Rockwell Automation Publication PFLEX-IN029B-EN-P - August 2014
Chapter 5 PowerFlex 700H and 700S Drives - Frame 13 Procedures
c. Remove the two M4 x 8 mm POZIDRIV screws that secure the AC fan
circuit board to the drive frame and carefully remove the circuit board.
d. Continue with step 8
.
6. Disconnect the cable from connector X2, X3, X8, and X81 on the DC fan
circuit board.
7. Remove the two M4 x 8 mm POZIDRIV screws that secure the main DC
fan circuit board to the drive frame and carefully remove the circuit board.
8. Install the fan circuit board in the reverse order of removal.
c.
PZ2
3.0 N•m (27.0 lb•in)
667
PZ2
3.0 N•m (26.5 lb•in)
Converter section
with DC fan system