Owner manual

Rockwell Automation Publication PFLEX-IN029B-EN-P - August 2014 107
PowerFlex 700H and 700S Drives - Frame 11 Procedures Chapter 3
5. Cut the cable ties securing the wires marked Brown and Blue.
6. Disconnect the AC fan capacitor wire connectors marked Brown and
Blue.
7. If a series A capacitor is installed, continue with the next step. If a series B
capacitor is installed, measure the value of the capacitor. If the value of the
capacitor is not
7 μF, continue with the next step.
8. Unscrew and remove the fan capacitor from the AC fan inverter assembly.
658
Series B Capacitor in a Right-side
AC Fan Inverter Assembly Shown.
Series A Capacitor in a Right-side
AC Fan Inverter Assembly Shown
Series A Capacitor Shown
Note: AC Fan System Shown