Owner manual
1-14 Installation/Wiring
PowerFlex Diode Bus Supply User Manual
Publication 20T-UM001D-EN-P
3. Review important precaution/attention statements throughout this
document before installing the drive(s).
4. Ground as described in General Grounding Requirements
on page 1-4.
5. Control wiring and DC bus wiring leaving the cabinet must be a
braided, shielded cable with a coverage of 75% or better, metal conduit
or equivalent attenuation.
For additional conditions, see the respective drive Reference Manual and
installation guidelines (see Specific Drive Information
on page P-1).