Owner's manual

Rockwell Automation Publication 20P-UM001I-EN-P - February 2013 27
Installation and Wiring Chapter 1
Figure 8 - Lifting Frame D Drives
4. Lift the drive into place onto the bolt(s) installed in the panel.
5. Install the remaining bolts into the panel. Tighten M8 bolts to a minimum
torque of 15 N
•m (132.7 lb•in) and M10 bolts to a minimum torque of 25
N
•m (221.2 lb•in).
Must be less
than 45° angle