User Manual

2 Rockwell Automation Publication 20P-IN072A-EN-P - October 2013

PowerFlex DC Drive - Frame D, Series B Fan Circuit Board

What This Kit Includes

• Fan circuit board, series B

• Four hexalobular screws

• Static strap

Tools That You Need

• T15 and T25 hexalobular screwdrivers

What You Need to Do

To install the fan circuit board:

❐ Step 1: Remove power from the drive

❐ Step 2: Remove the top protective cover

❐ Step 3: Remove the existing fan circuit board

❐ Step 4: Install the new fan circuit board

❐ Step 5: Replace the top protective cover and document the change

Step 1: Remove Power from

the Drive

Remove and lock-out all incoming power to the drive.

ATTENTION: Remove power before making or breaking cable connections.

When you remove or insert a cable connector with power applied, an electrical

arc may occur. An electrical arc can cause personal injury or property damage

by:

• sending an erroneous signal to your system’s field devices, causing unintended

machine motion

• causing an explosion in a hazardous environment

Electrical arcing causes excessive wear to contacts on both the module and its

mating connector. Worn contacts may create electrical resistance.

L1 L2 L3