Instruction Manual

Publication 20P-IN064A-EN-P - May 2010
Copyright © 2010 Rockwell Automation. All rights reserved. Printed in USA.
www.rockwellautomation.com
A
mericas: Rockwell Automation, 1201 South Second Street, Milwaukee, WI 53204-2496 USA, Tel: [phone] , Fax: [phone]
Europe/Middle East/Africa:
Rockwell Automation SA/NV, Vorstlaan/Boulevard du Souverain 36, 1170 Brussels, Belgium, Tel: [phone], Fax: [phone]
A
sia Pacific: Rockwell Automation, Level 14, Core F, Cyberport 3, 100 Cyberport Road, Hong Kong, Tel: [phone], Fax: [phone]
Power, Control and Information Solutions
Step 4: Install the New
Discharge Resistors
Install the new discharge resistors in reverse order of removal as detailed in
Step 3: Remove the Existing Discharge Resistors
above.
Step 5: Close the Control
Panel and Document the
Change
1. Close the control panel in the reverse order of removal as detailed in
Step 2: Open the Control Panel
on page 2.
2. Record the installation of the new resistors and date of installation on
the Field Installed Option label on the side of the drive (as shown
below).
Related Documentation
Allen-Bradley publications are available on the internet at
www.rockwellautomation.com/literature.
For . . . Read this document
Publication
Number
In depth information regarding the
operation of PowerFlex Digital DC drives
User Manual - PowerFlex Digital DC Drives 20P-UM001…